Set your time zone in Control panel/Date and time

Open an Administrator CMD prompt.

C:\>reg add HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation /v RealTimeIsUniversal /t REG_DWORD /d 1 /reg:32
C:\>sc config w32time start= auto
C:\>sc start w32time
C:\>w32tm /config /update "/manualpeerlist:0.europe.pool.ntp.org 1.europe.pool.ntp.org 2.europe.pool.ntp.org"

To sync the time manually:

C:\>w32tm /resync

To see NTP client status:

C:\>w32tm /query /peers
#Peers: 3

Peer: 0.europe.pool.ntp.org
State: Active
Time Remaining: 1011.2400896s
Mode: 3 (Client)
Stratum: 2 (secondary reference - syncd by (S)NTP)
PeerPoll Interval: 10 (1024s)
HostPoll Interval: 10 (1024s)

Peer: 1.europe.pool.ntp.org
State: Active
Time Remaining: 1011.2401253s
Mode: 3 (Client)
Stratum: 2 (secondary reference - syncd by (S)NTP)
PeerPoll Interval: 10 (1024s)
HostPoll Interval: 10 (1024s)

Peer: 2.europe.pool.ntp.org
State: Active
Time Remaining: 1011.2401500s
Mode: 3 (Client)
Stratum: 1 (primary reference - syncd by radio clock)
PeerPoll Interval: 10 (1024s)
HostPoll Interval: 10 (1024s)

C:\>w32tm /query /status

C:\>w32tm /query /configuration
Advertisements